RS232 TO RS422/485 ISOLATED CONVERTER
$70.00
With this isolated RS232 to RS422 or RS485 converter you can safely transfer data between any serial device without worrying about data loss or damage to electronic components. This converter also protects against ground loops and network surges and spikes up to 1500W and static electricity up to 15KV. Perfect for any general and industrial application. Requires external power supply which is included with each converter.
| Standard | EIA RS-232, RS-485, RS-422 |
| RS-232 signal | TX, RX, GND |
| RS-485 signal | D+, D-, GND |
| RS-422 signal | R+, R-, T+, T-, GND |
| Working mode | Asynchronous, point to point or multi point, 2 wire half-duplex, 4 wire full-duplex |
| Direction | Automatic send data control |
| Band rate | 300-115200bps, auto sense serial signal rate |
| Dimensions | 64mm x 48mm x 21mm |
| Power consumption | Static less than10mA, continuous less than 40mA |
| Input power | 9V external powered (included) |
| Transmission | RS-485/422 side 1200M(9600bps), RS-232 side less than 15M |
| Port protection | 1500W surge protection, 15KV static protection |
| Interface | RS-232 side DB-9 female, RS-485/422 side 5 terminal block |